伊顿中国
Lead Power & Embedded Electronics Design Engineer
Lead Power & Embedded Electronics Design Engineer
发布于 大约 15 小时前普通员工/个人贡献者
Raleigh, North Carolina, USA, 27616
高级经验
全职员工
仅现场办公
本科
硬件工程
Analog/Digital Circuits
Oscilloscopes
Pcb Layout
Power Electronics
Six Sigma
Dsp
Fpga
Simplis
Spice
AI 估算 · 9k–13k
Based on US market for senior hardware engineer in Raleigh, NC; skills in power electronics and embedded systems command premium
职位详情
关于这个职位
This role focuses on designing and developing power and embedded electronics circuits for Eaton's Power Electronics and Battery Center of Excellence. You will own the full design cycle from concept to testing, working with analog, digital, and power circuits including DSP/microprocessor/FPGA, sensor interfaces, and SMPS. Collaboration with cross-functional teams and up to 10% travel are expected.
最低要求
Bachelor's degree in engineering from an accredited institution.
Minimum 6 years of engineering experience in designing and developing analog, digital, and power circuits, including embedded electronics circuits, sensor interface, communication cards, gate drivers, and SMPS.
Minimum 5 years of experience in circuit modeling and simulation with tools such as SPICE or Simplis.
Minimum 5 years of hands-on experience with analog, digital, and power circuits development and testing.
工作职责
Leads electronics circuit design and development activities and demonstrates start-finish ownership for the assigned projects and tasks.
Performs design, modeling, simulation, and implementation of analog, digital, and power circuits including embedded electronics circuits with DSP/micro-processor/FPGA, sensor interfaces, communication cards, etc.
Performs analog, digital, and power circuit functional testing.
Develops the technical requirements for and identifies components for the designs.
Creates technical reports and presentations.
Builds and measures test circuits. Analyzes data to improve/optimize the designs.
Collaborates with mechanical, thermal, and firmware engineers to successfully develop and validate the designs.
Evaluates the designs to meet requirements factoring in performance, size, cost, manufacturability, and reliability.
优先资格
PCB layout experience and knowledge of PCB assembly process.
Experience in designing electronics with thermal and reliability consideration (e.g., electronic simulation for DfR and DfM or worst-case analysis).
Experience in designing high-speed electronics.
Experience with SI and PI analysis tools for high-speed designs.
Demonstrated knowledge of engineering processes.
Design for Six Sigma certification.
Familiar with test equipment such as oscilloscopes, signal generators, power supplies, and other standard EE lab equipment.
AI 洞察
优缺点分析
优点
- Eaton is a Fortune 500 company with strong global presence, offering job stability and excellent benefits.
- The role involves cutting-edge power electronics and embedded systems, providing valuable technical depth.
- Opportunity to work on scalable platforms used across multiple business units, broadening impact.
- Relocation assistance is offered for candidates moving to Raleigh.
- Requires deep expertise and 6+ years of experience, making it less accessible for early-career engineers.
- Up to 10% travel may disrupt work-life balance for some.
- The role demands ownership of complex designs, which can be stressful under tight deadlines.
- Experienced hardware engineers who enjoy owning complex circuit designs and working in a collaborative, innovation-driven environment.
缺点 / 挑战
暂无明显挑战项
角色解读
- Progress to Senior Principal Engineer or Technical Fellow within Eaton's R&D.
- Move into management roles such as Hardware Manager or Director of Engineering.
- Expand expertise into system architecture, power systems, or battery technology.
- Design and develop analog, digital, and power circuits, including embedded systems with DSP/FPGA.
- Own the full lifecycle of circuit design from requirements to testing and optimization.
- Collaborate with mechanical, thermal, and firmware engineers to integrate designs.
- Create technical documentation and present results to stakeholders.
- Strong background in power electronics, SMPS, and embedded circuit design.
- Proficiency in simulation tools like SPICE or Simplis for circuit modeling.
- Hands-on experience with lab equipment (oscilloscopes, signal generators, power supplies).
- Knowledge of PCB layout, thermal/reliability design, and high-speed design is a plus.
申请策略
- Tailor your resume to match the exact keywords from the job description, especially 'analog, digital, power', 'SPICE', 'embedded', etc.
- Prepare to discuss a past project where you led a circuit design from concept to test, emphasizing challenges and solutions.
- Emphasize years of experience and specific projects in analog, digital, and power circuit design.
- Highlight proficiency with SPICE or Simplis simulation tools and hands-on lab testing.
- Include any experience with PCB layout, high-speed design, or Six Sigma certifications.
- Showcase cross-functional collaboration and end-to-end product development.
- Brush up on power electronics topologies and SMPS design principles.
- Practice with simulation tools like LTspice or Simplis if not used recently.
面试指南
- Use the STAR method (Situation, Task, Action, Result) for behavioral questions.
- For technical questions, outline your design process: requirements, modeling, simulation, prototyping, testing, iteration.
- Emphasize data-driven decision making and trade-offs (e.g., size vs. performance, cost vs. reliability).
- Describe a time you designed a power circuit (e.g., SMPS) and how you ensured its reliability.
- How do you approach circuit simulation and validation? Give an example using SPICE or Simplis.
- Explain your experience with high-speed digital design and signal integrity considerations.
- How do you collaborate with firmware or mechanical engineers on a complex design?
- Describe a difficult design problem you solved and the steps you took.
职位点评
70
综合评分
Senior hardware design role at a global industrial leader, strong technical depth, good pay, but on-site with travel.
更适合这类人
Candidates who prioritize technical growth and competitive compensation over flexible work arrangements.
表现最好
成长发展
相对薄弱
工作生活
薪资福利75
成长发展80
工作生活60
使命价值65
薪资福利
75中等
Compensation is competitive for the area, with a clear salary range and benefits typical of a large corporation. Relocation assistance adds value.
薪资信号偏高 (8K-12K/月)
福利待遇Relocation assistance、Health and Welfare benefits、Retirement benefits、paid and unpaid time away from work
成长发展
80较高
The role offers technical growth in power electronics and embedded systems, with exposure to platform development across business units. No explicit promotion path mentioned, but the lead title suggests advancement potential.
技术前沿主流现代技术
技术栈Power Electronics、Embedded Electronics、DSP、FPGA、SMPS、SPICE、Simplis
业务类型profit_center
工作生活
60中等
On-site work in Raleigh with up to 10% travel. No remote or flexible work options mentioned. Office location not specified, but likely in a suburban corporate park.
工作模式仅现场办公
办公地点未明确
加班情况未提及（无法判断）
使命价值
65中等
Eaton's focus on energy management and electrification aligns with sustainability trends. The role contributes to scalable platforms that enable innovative products, but direct societal impact is indirect.
行业发展高速增长赛道
社会影响中性/一般
创新程度积极采用新技术
Watch Jobs